英文版总线消防主机外贸推荐出口型火警报警控制器

 

FACP-6000-1AB火灾报警控制器（壁挂联动型）

主要技术特性

电源：

交流电源(主电源)：额定工作电压 ～220V （187～242V）

备用电源：根据不同点数，应配置不同容量的备用电源。

使用环境：

温 度： 0℃～+42℃

相对湿度：≤95%，不凝露

容量：壁挂型、回路数: 2个回路 回路地址的最大用量:242点

显示器：LCD液晶屏

外形尺寸：（长*宽*高）470mm*130mm*420mm

布线要求:

·485通讯线和报警总线最好使用双绞线RVS2×1.0㎜2或RVS2×1.5㎜2,当环境干扰比较大时，485通讯线应考虑使用RVSP2×1.0㎜2的双绞屏蔽线

·绝对不可将485通讯线和电话线与报警总线布在同一根多芯电缆中。

 

FACP-6000-1AB fire alarm controller (wall-mounted intermodal)

Main technical characteristics

Power supply:

Ac power (main power supply) : rated working voltage ~ 220V (187 ~ 242V)

Standby power supply: according to different points, alternate power sources should be equipped with different capacities.

Use environment:

The temperature: 0 ℃ ~ 42 ℃

Relative humidity: no more than 95%, no condensation

Capacity: wall hanging type, return number: the maximum amount of two loop return addresses: 242 points

Monitor: LCD LCD screen

Dimensions: (long * wide * height) 470mm * 130mm * 420mm

Wiring requirements:

· 485 communication line and alarm bus it is best to use twisted-pair RVS2 x 2 or 1.0 ㎜ RVS2 x 1.5 ㎜ 2, when the environment is larger, 485 communication line should consider using RVSP2 x 1.0 ㎜ 2 twisted-pair shielded wire

· no 485 communication line and telephone line and alarm bus are not in the same multi-core cable.